Removal [09/2014 - ]: Procedure
- PRECAUTION NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Refer to PRECAUTION [09/2014 - 11/2017] , or refer to PRECAUTION [11/2017 - 09/2020] , or refer to PRECAUTION [09/2020 - ]
- CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)
Refer to PROCEDURE - Step 2
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [09/2014 - 10/2015] , or refer to INITIALIZATION [10/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 10/2018] , or refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2022] , or refer to INITIALIZATION [10/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]
- REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 9 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 9 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 9 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 9 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]
- DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 10 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 10 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 10 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 10 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - ]
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 11 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 11 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 11 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 11 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - ]
- REMOVE METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 14 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 14 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 14 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 14 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 14 [10/2022 - ]
- REMOVE COMBINATION METER ASSEMBLY