LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> NX 200t Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostics - Introduction (1 Of 4) >> Meter / Gauge System >> Initialization [10/2014 - ] >> Initialization [10/2014 - ]

Initialization [10/2014 - ]

  1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (with mph units) 
    1. Turn the engine switch on (IG).
    2. Using the steering pad switch assembly, display the setting display on the multi-information display.
    3. Select "Maintenance System" from the setting display and perform initialization according to the multi-information display.

      HINT: 

      After initialization is complete, "Initialization Completed" will be displayed on the multi-information display.

scientia non olet · About LEMON Manuals