LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> NX 200t Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Triple Beam Headlight) - Diagnostic Codes & Symptom Tests >> LIGHTING SYSTEM (For Triple Beam Headlight) >> DTC B2414: Steering Position Sensor Malfunction [10/2014 - 09/2017] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this DTC.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 09/2017]

  • After the headlight light control ECU sub-assembly LH is replaced, vehicle information registration and initialization are necessary.

    Refer to INITIALIZATION [10/2014 - 09/2017]

  • The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

    Refer to PRECAUTION [10/2014 - 05/2019]

scientia non olet · About LEMON Manuals