Typical Malfunction Thresholds

[OFF malfunction] 

1. One of the following conditions is met: OFF malfunction (A), (B) or (C)
   OFF MALFUNCTION (A)
   
   

   Turbine speed - Output speed x 3rd gear ratio

   1000 rpm or more

   OFF MALFUNCTION (B)
   
   

   Turbine speed - Output speed x 5th gear ratio

   1000 rpm or more

   OFF MALFUNCTION (C)
   
   

   Turbine speed / Output speed when output speed less than 1000 rpm

   3.304 to 7.724

[ON malfunction] 

1. Both of the following conditions are met: ON malfunction (A), (B) or (C) and ON malfunction (D)

   2 detections are necessary per driving cycle:

   1st detection: temporary flag ON

   2nd detection: pending fault code ON

   ON MALFUNCTION (A) AND (B)
   
   

   Turbine speed / Output speed when output speed less than 1000 rpm

   1.399 to 1.649

   ON MALFUNCTION (C)
   
   

   Turbine speed / Output speed when output speed less than 1000 rpm

   0.705 to 0.836

   ON MALFUNCTION (D)
   
   

   Turbine speed / Output speed when output speed less than 1000 rpm

   0.998 to 1.138