LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> NX 200t Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission (U661E) - Diagnostic Codes (2 Of 2) & Circuit Tests) >> Automatic Transaxle System >> DTC P2756-13: Torque Converter Clutch Pressure Control Solenoid Control Circuit Open [10/2014 - ] >> Description

DTC P2756-13: Torque Converter Clutch Pressure Control Solenoid Control Circuit Open [10/2014 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to the system description for DTC P2756-7F.

Refer to SYSTEM DESCRIPTION  Refer to DTC P2756-7F: Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck Off [07/2020 - ] 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P2756-13 Torque Converter Clutch Pressure Control Solenoid Control Circuit Open Open or short is detected in shift solenoid valve SLU circuit for 1 sec. or more while driving (1-trip detection logic)
  • Open or short in shift solenoid valve SLU circuit
  • Wiring harness connector
  • Transmission wire
  • Shift solenoid valve SLU
  • ECM
Comes on DTC stored SAE: P2759