Typical Malfunction Thresholds

WARNING: This page is about a different variant/trim than selected.

[OFF malfunction]

One of the following conditions is met: OFF malfunction (A), (B) or ((C) and (D))
OFF MALFUNCTION (A)

Turbine speed - Output speed x 2nd gear ratio 1000 rpm or more

OFF MALFUNCTION (B)

Turbine speed - Output speed x 6th gear ratio 1000 rpm or more

OFF MALFUNCTION (C) AND (D)

Turbine speed / Output speed when output speed less than 1000 rpm 3.304 to 7.724

[ON malfunction]

2 detections are necessary per driving cycle:
1st detection: temporary flag ON

2nd detection: pending fault code ON
ON MALFUNCTION

Turbine speed / Output speed when output speed less than 1000 rpm 1.901 to 2.340