Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[OFF malfunction]
OFF MALFUNCTION
| Turbine speed - Output speed x Gear ratio |
1000 rpm or more |
[ON malfunction]
- One of the following conditions is met: ON malfunction (A), (B) or (C)
2 detections are necessary per driving cycle:
1st detection: temporary flag ON
2nd detection: pending fault code ON
ON MALFUNCTION (A), (B) OR (C)
| Turbine speed / Output speed when output speed less than 1000 rpm |
0.998 to 1.138 |