DTC P0740-11: Torque Converter Clutch Circuit Short to Ground [10/2014 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Shift solenoid valve SL is turned on and off by signals from the ECM to control the hydraulic pressure acting on the lock-up relay valve, which then controls operation of the lock-up clutch.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0740-11 | Torque Converter Clutch Circuit Short to Ground | The shift solenoid valve SL terminal voltage level is low, when the shift solenoid valve SL is operated (2 trip detection logic). |
|
Comes on | DTC stored | SAE: P2769 |
Fail-safe function:
If the ECM detects a malfunction, it turns shift solenoid valve SL off.