Typical Malfunction Thresholds

WARNING: This page is about a different variant/trim than selected.

When either condition below is met: Condition (A) or (B)

Condition (A)

Any two of the following conditions are met:	Conditions 1, 2 and 3
1. One of the following conditions is met:	Conditions (a), (b) or (c)
(a) P position switch	ON
(b) N position switch	ON
(c) Park/neutral position switch (NSW)	ON
2. R position switch	ON
3. D position switch	ON

Condition (B)

All of the following conditions are met

P position switch	OFF
N position switch	OFF
Park/neutral position switch (NSW)	OFF
R position switch	OFF
D position switch	OFF