DTC P0705-13: Transmission Range Sensor "A" Circuit Open; DTC P0705-62: Transmission Range Sensor "A" Signal Compare Failure [10/2014 - ]: Description

WARNING: This page is about a different variant/trim than selected.

The park/neutral position switch assembly detects the shift lever position and sends signals to the ECM.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0705-13	Transmission Range Sensor "A" Circuit Open	All switches are OFF simultaneously for P, N, NSW, R and D (2-trip detection logic).	Open or short in park/neutral position switch assembly circuit Park/neutral position switch assembly ECM	Comes on	DTC stored	SAE: P0705
P0705-62	Transmission Range Sensor "A" Signal Compare Failure	Any 2 or more of the following signals are ON simultaneously (2-trip detection logic). One of the following conditions is met. P input signal is ON N input signal is ON NSW input signal is ON R input signal D input signal	Open or short in park/neutral position switch assembly circuit Park/neutral position switch assembly ECM	Comes on	DTC stored	SAE: P0705