LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> NX 200t Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission (U661E) - Diagnostic Codes (1 Of 2)) >> Automatic Transaxle System >> DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [10/2014 - 09/2017] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different variant/trim than selected.
CASE 1

Either of the following conditions is met (2 data) 1 or 2
1. Either of the following conditions is met (10 time) (a), (b) or (c)
(a) EEPROM communication timeout Occurred
(b) Permanent Fault Code Not stored
(c) Permanent Fault Code Not equal to commanded Fault Code
2. Storing processing is more than 0.096 seconds Not completed
CASE 2

Either of the following conditions is met (2 data) 1 or 2
1. Either of the following conditions is met (10 time) (a) or (b)
(a) EEPROM communication timeout Occurred
(b) Permanent Fault Code Stored
2. Storing processing is more than 0.096 seconds Not completed
CASE 3

Either of the following conditions is met (2 data) 1 or 2
1. Either of the following conditions is met (10 time) (a) or (b)
(a) EEPROM communication timeout Occurred
(b) Reading processing is more than 0.096 seconds Not completed
2. Permanent Fault Code data (10 time) Mismatch
scientia non olet · About LEMON Manuals