DTC P0615-12: Starter Relay Circuit Short to Battery [10/2014 - ]: Description
WARNING: This page is about a different variant/trim than selected.
While the engine is being cranked, battery voltage is applied to terminal STA of the ECM.
If the ECM detects the Starter Control (STA) signal while the vehicle is being driven, it determines that there is a malfunction in the STA circuit. The ECM then illuminates the MIL and stores this DTC.
This monitor runs when the vehicle is driven at 20 km/h (12.43 mph) for over 20 seconds.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0615-12 | Starter Relay Circuit Short to Battery | Conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied to the ECM for 20 seconds (1 trip detection logic). (a) Vehicle speed is 20 km/h (12.43 mph) or more. (b) Engine speed is 1000 rpm or more. (c) STA signal is on. |
|
Comes on | DTC stored | SAE: P0617 |