LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> IS 250 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> Shift Paddle Switch >> Removal [10/2016 - ] >> Procedure

Removal [10/2016 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE STEERING WHEEL ASSEMBLY 

    Refer to REMOVAL [10/2016 - 11/2021] , or refer to REMOVAL [11/2021 - ]

  2. REMOVE CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 2

  3. REMOVE STEERING PAD SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 3

  4. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 
    1. Disengage the guide to disconnect the No. 1 switch wire from the steering wheel assembly.
      GTY640855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the No. 1 switch wire connector.
    3. Remove the 4 screws, and disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.
      GTY640861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 6 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.
      GTY677574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.
      GTY635556Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals