Removal [09/2020 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2GR-FKS)
Refer to REMOVAL [09/2020 - ]
- REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 8AR-FTS)
Refer to REMOVAL [09/2020 - ]
- REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR
Refer to PROCEDURE - Step 3
- SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
- Move the shift lever to N.
- Remove the nut and separate the floor shift gear shifting rod sub-assembly from the lever of the transmission floor shift assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE CONSOLE BOX ASSEMBLY
Refer to REMOVAL [09/2020 - 11/2021]
, or refer to REMOVAL [11/2021 - ]
- REMOVE NO. 1 CONSOLE BOX DUCT
- Disengage the clamp from the No. 1 console box duct.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 clips and No. 1 console box duct.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
- Disconnect the shift lock control ECU connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 4 clamps from the transmission floor shift assembly.
- Disconnect the transmission control switch connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts and transmission floor shift assembly from the vehicle body.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|