LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> IS 250 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Lubrication System (8AR-FTS) - Service Information) >> Engine Oil Temperature Sensor >> Removal [08/2015 - 10/2016] >> Procedure

Removal [08/2015 - 10/2016]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE OIL 

    See step  1

  2. REMOVE FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 12

  3. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 13

  4. REMOVE TEMPERATURE SENSOR 
    1. Disconnect the temperature sensor connector.
      GTY641318Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 19 mm ball joint lock nut wrench, remove the temperature sensor from the stiffening crankcase assembly.
    3. Remove the gasket from the temperature sensor.
scientia non olet · About LEMON Manuals