Installation [04/2013 - 10/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Lexus IS 350, 2017 Lexus IS 300, 2016 Lexus IS 350, 2016 Lexus IS 300, and 2015 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
1. Apply adhesive to 2 or 3 threads of the PCV valve (ventilation valve sub-assembly).
  Adhesive
  
  Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
2. Using a 19 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly LH.
  Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
  
  NOTE:
  Do not start the engine for at least 1 hour after installation.
3. Connect the ventilation hose assembly to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.
INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 105 [04/2013 - 08/2015] , or refer to PROCEDURE - Step 106 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 106 [10/2016 - 10/2017]