LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> IS 250 Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (4GR-FSE) - Service Information >> Oil Pressure Switch >> Removal [04/2013 - 08/2015] >> Procedure

Removal [04/2013 - 08/2015]: Procedure

  1. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE NO. 1 AIR CLEANER INLET 

    Refer to PROCEDURE - Step 20

  3. DRAIN ENGINE OIL 

    See step  1

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the engine oil pressure switch assembly connector.
      GTY467475Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    2. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
scientia non olet · About LEMON Manuals