Operation Check [10/2015 - ]
- INSPECT INDICATOR/WARNING LIGHT
- Check the following indicators and warning lights.
Indicator/Warning Light Switch Condition Specified Condition Master warning light Engine switch off → on (IG) Comes on for 3 seconds Brake warning light ABS warning light PCS warning light*1 Slip indicator light VSC OFF indicator light Tire pressure warning light Automatic high beam indicator light BSM indicator light*2 AFS OFF indicator light*3 ECO drive indicator light Brake hold indicator light Brake hold warning light SRS warning light Engine switch off → on (IG) Comes on for 6 seconds MIL Engine switch off → on (IG) - Illuminates when engine switch turned on
- Turns off when engine started
Charge warning light*4 EPS warning light *1: w/ Pre-crash Safety System*2: w/ Blind Spot Monitor System*3: w/ AFS (Adaptive Front-lighting System)*4: for Sport Package
- Check the following indicators and warning lights.
- INSPECT SPEEDOMETER
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine and ECT / Data List.FOR U.S.A.
Standard Indication Acceptable Range 20 mph 19.3 to 21.8 mph 40 mph 39.6 to 42.4 mph 60 mph 60.2 to 63 mph 80 mph 80.5 to 83.7 mph 100 mph 101 to 104.2 mph 120 mph 121.5 to 124.7 mph 140 mph 142 to 145.2 mph 160 mph* 162.6 to 165.8 mph 180 mph* 183.1 to 186.3 mph *: for Sports Package
FOR CANADAStandard Indication Acceptable Range 20 km/h 18.5 to 22.5 km/h 40 km/h 38.8 to 43.3 km/h 60 km/h 59.4 to 63.9 km/h 80 km/h 79.6 to 84.6 km/h 100 km/h 100.1 to 105.1 km/h 120 km/h 120.6 to 125.6 km/h 140 km/h 141.1 to 146.1 km/h 160 km/h 161.7 to 166.7 km/h 180 km/h 182.2 to 187.2 km/h 200 km/h 202.7 to 207.7 km/h 220 km/h 223.2 to 228.2 km/h 240 km/h 243.7 to 248.7 km/h 260 km/h* 264.3 to 269.3 km/h *: for Sports Package
If the result is not as specified, the speedometer may have a malfunction.
NOTE:Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.
- Check the deflection width of the speedometer indicator.
Reference
Within 0.3°
- INSPECT TACHOMETER
- Connect a tune-up tachometer and start the engine.
- Compare the test results with the tachometer indicator.
DC 13.5 V at 25°C (77°F)
Standard Indication (rpm) Acceptable Range
Data in () is for Reference700 630 to 770 1000 (900 to 1100) 2000 (1850 to 2150) 3000 2800 to 3200 4000 (3800 to 4200) 5000 4800 to 5200 6000 (5750 to 6250) 7000 6700 to 7300 8000 (7700 to 8300) If the result is not as specified, the tachometer may have a malfunction.
- INSPECT METER/GAUGE
- Connect the Techstream to the DLC3.
- Perform the Active Test (Refer to DATA LIST / ACTIVE TEST [10/2015 - ]
).
OK
Each meter/gauge needle indication is normal.
- INSPECT WARNING/INDICATOR LIGHT
- Connect the Techstream to the DLC3.
- Perform the Active Test (Refer to DATA LIST / ACTIVE TEST [10/2015 - ]
).
OK
Each warning/indicator light can be turned on and off using the Techstream.
- INSPECT MULTI-INFORMATION DISPLAY
- Connect the Techstream to the DLC3.
- Perform the Active Test (Refer to DATA LIST / ACTIVE TEST [10/2015 - ]
).
OK
All dots in the multi-information display can be turned on and off using the Techstream.