Removal [08/2013 - ]
- PRECAUTION NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work. Refer to PRECAUTION [08/2013 - ] .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [08/2013 - ] .
- REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL . Refer to REMOVAL [08/2013 - ] - Step 31
- REMOVE ACCESSORY METER ASSEMBLY
- Remove the 3 screws.
- Disengage the 2 clips.
- Disconnect each connector and remove the accessory meter assembly.