LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> IS 350 Base, AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Stabilizer Bar >> Removal [09/2020 - ] >> Procedure

Removal [09/2020 - ]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to REMOVAL [09/2020 - ]

  2. REMOVE REAR STABILIZER LINK ASSEMBLY LH 
    1. Remove the 2 nuts and rear stabilizer link assembly LH.

      HINT: 

      If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

      GTY460329Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR STABILIZER LINK ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

  4. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [09/2020 - 11/2021] , or refer to REMOVAL [11/2021 - ]

  5. REMOVE REAR STABILIZER BAR 
    1. Remove the 4 bolts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings from the rear suspension member sub-assembly.
      GTY502642Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR NO. 1 STABILIZER BAR BRACKET 
    1. Remove the 2 rear No. 1 stabilizer bar brackets from the 2 rear stabilizer bushings.
  7. REMOVE REAR STABILIZER BUSHING 
    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
scientia non olet · About LEMON Manuals