Installation [08/2015 - 10/2017]: Procedure

1. Install the suspension tower damper to the front upper No. 2 suspension member with the 4 bolts.

   Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

   NOTE:

   Do not extend or compress the damper.

for 2GR-FSE: Refer to PROCEDURE - Step 105 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 105 [10/2016 - 10/2017]

for 8AR-FTS: Refer to PROCEDURE - Step 79 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 78 [10/2016 - 09/2020]