LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Lubrication System (8AR-FTS) - Service Information) >> Oil Level Sensor >> Installation [08/2015 - 10/2016] >> Procedure

Installation [08/2015 - 10/2016]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Clean the engine oil level sensor installation area in the oil pan sub-assembly.
    2. Install a new gasket to the engine oil level sensor.
    3. Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

      Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf) 

    4. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  4

  3. CHECK ENGINE OIL LEVEL 

    See step  6

  4. INSPECT FOR ENGINE OIL LEAK 

    See step  5

  5. INSTALL NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 77

  6. INSTALL FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 78

scientia non olet · About LEMON Manuals