LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> GX 460 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation [08/2013 - ] >> Installation [08/2013 - ]

Installation [08/2013 - ]

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Attach the 2 clips.
    3. Install the combination meter assembly with the 2 screws.
  2. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to INSTALLATION [08/2013 - ] - Step 26
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Driver Monitor Camera) 
    1. Attach the guide.
    2. Attach the 4 claws.
    3. Attach the 2 clips to install the instrument cluster finish panel sub-assembly.
    4. Attach the 4 claws.
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Driver Monitor Camera) 
    1. Attach the guide.
    2. Attach the 4 claws.
    3. Attach the 2 clips to install the instrument cluster finish panel sub-assembly.
  5. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION  . Refer to INSTALLATION [08/2013 - ] - Step 29
  6. INSTALL LOWER STEERING COLUMN COVER (w/ Driver Monitor Camera) 
  7. INSTALL UPPER STEERING COLUMN COVER (w/ Driver Monitor Camera) 
  8. INSTALL NO. 2 SWITCH HOLE BASE  . Refer to INSTALLATION [08/2013 - ] - Step 30
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [08/2013 - ] .

  10. RESTORE AUTOAWAY/RETURN FUNCTION 
    1. Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS [08/2013 - ] .
scientia non olet · About LEMON Manuals