Freeze Frame Data [09/2013 - ]

FREEZE FRAME DATA
1. Whenever a meter DTC is stored, the meter CPU stores the current vehicle state as Freeze Frame Data.

CHECK FREEZE FRAME DATA

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

According to the Techstream display, select the trouble code data display with Freeze Frame Data.

COMBINATION METER

Tester Display	Measurement Item	Reference Value
Lost Communication with ECM/PCM "A"	The distance and time when the DTC stored	Min.: 0, Max.: 999999
Lost Communication with Brake System Control Module	The distance and time when the DTC stored	Min.: 0, Max.: 999999
Lost Communication with VGRS	The distance and time when the DTC stored	Min.: 0, Max.: 999999
Lost Communication with Power Steering Control Module	The distance and time when the DTC stored	Min.: 0, Max.: 999999
Lost Communication with Body Control Module "B"	The distance and time when the DTC stored	Min.: 0, Max.: 999999
Lost Communication with Restraints Control Module	The distance and time when the DTC stored	Min.: 0, Max.: 999999

CLEAR FREEZE FRAME DATA
NOTE:
Clearing the DTC will also clear the Freeze Frame Data.
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTC and Freeze Frame Data. Refer to DTC CHECK / CLEAR [09/2013 - ] .