LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> LS 460L RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge (Service Information) >> Combination Meter >> Installation [09/2012 - ] >> Installation [09/2012 - ]

Installation [09/2012 - ]

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector and attach the 2 claws to close the connector cover.
      Fig 1: Identifying Combination Meter Assembly Connectors
      GTY406639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the combination meter assembly with the 4 screws.
  2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)  . Refer to INSTALLATION [09/2012 - ] - Step 9
  3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)  . Refer to INSTALLATION [09/2012 - ] - Step 10
  4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Connect the 2 connectors.
    2. Attach the 6 clips to install the No. 2 instrument cluster finish panel sub-assembly.
      Fig 2: Identifying No. 2 Instrument Cluster Finish Panel Sub-Assembly Clips
      GTY406641Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 2 clips.
  5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  . Refer to INSTALLATION [09/2012 - ] - Step 28
  6. INSTALL INSTRUMENT PANEL ORNAMENT  . Refer to INSTALLATION [09/2012 - ] - Step 29
  7. INSTALL INSTRUMENT SIDE PANEL LH  . Refer to INSTALLATION [09/2012 - ] - Step 30
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [09/2012 - ] .

  9. ENABLE AUTOAWAY/RETURN FUNCTION 
    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS [09/2012 - ] .
  10. INSTALL COWL TOP VENTILATOR LOUVER RH  . Refer to INSTALLATION [09/2012 - ] - Step 15
scientia non olet · About LEMON Manuals