Initialization [08/2012 - ]
- Maintenance Required Reminder Resetting Procedure
HINT:
The trip meter reset knob is located on the left side of the combination meter assembly.
- Engine switch on (IG) while pressing and holding the trip meter reset knob. Hold the trip meter reset knob until the following conditions are met and 5 seconds have passed.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- The ODO meter shows "000000".
- The master warning light illuminates.
- When "000000" disappears and the master warning light turns off, the resetting procedure is complete.
- Engine switch on (IG) while pressing and holding the trip meter reset knob. Hold the trip meter reset knob until the following conditions are met and 5 seconds have passed.