DTC B1850/62: Short in Rear Side Squib RH Circuit; DTC B1851/62: Open in Rear Side Squib RH Circuit; DTC B1852/62: Short to GND in Rear Side Squib RH Circuit; DTC B1853/62: Short to B+ in Rear Side Squib RH Circuit: Description
The rear side squib RH circuit consists of the center airbag sensor assembly and rear seat airbag RH.
This circuit instructs the SRS to deploy when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the rear side squib RH circuit.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1850/62 |
One of the following conditions is met:
- The center airbag sensor assembly detects a line short circuit signal 5 times in the rear side squib RH circuit during the primary check.
- A rear side squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
- Floor wire
- Rear seat airbag assembly RH (Rear side squib RH)
- Center airbag sensor assembly
|
| B1851/62 |
One of the following conditions is met:
- The center airbag sensor assembly detects an open circuit signal in the rear side squib RH circuit for 2 seconds.
- A rear side squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
| B1852/62 |
One of the following conditions is met:
- The center airbag sensor assembly detects a short circuit to ground signal in the rear side squib RH circuit for 0.5 seconds.
- A rear side squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
| B1853/62 |
One of the following conditions is met:
- The center airbag sensor assembly detects a short circuit to B+ signal in the rear side squib RH circuit for 0.5 seconds.
- A rear side squib RH malfunction.
- A center airbag sensor assembly malfunction.
|