DTC B1830/57: Short in Curtain Shield Squib RH Circuit; DTC B1831/57: Open in Curtain Shield Squib RH Circuit; DTC B1832/57: Short to GND in Curtain Shield Squib RH Circuit; DTC B1833/57: Short to B+ in Curtain Shield Squib RH Circuit: Description
The curtain shield squib RH circuit consists of the center airbag sensor assembly and curtain shield airbag RH.
The circuit instructs the SRS to deploy when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the curtain shield squib RH circuit.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1830/57 |
One of the following conditions is met:
- The center airbag sensor assembly detects a line short circuit signal 5 times in the curtain shield squib RH circuit during the primary check.
- A curtain shield squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
- Floor wire
- Curtain shield airbag assembly RH (Curtain shield squib RH)
- Center airbag sensor assembly
|
| B1831/57 |
One of the following conditions is met:
- The center airbag sensor assembly detects an open circuit signal in the curtain shield squib RH circuit for 2 seconds.
- A curtain shield squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
| B1832/57 |
One of the following conditions is met:
- The center airbag sensor assembly detects a short circuit to ground signal in the curtain shield squib RH circuit for 0.5 seconds.
- A curtain shield squib RH malfunction.
- A center airbag sensor assembly malfunction.
|
| B1833/57 |
One of the following conditions is met:
- The center airbag sensor assembly detects a short circuit to B+ signal in the curtain shield squib RH circuit for 0.5 seconds.
- A curtain shield squib RH malfunction.
- A center airbag sensor assembly malfunction.
|