DTC C13A0/11: Open in Power Supply Relay Circuit; DTC C13A5/41: Electric Current of Motor; DTC C13B0: Electric Parking Brake ECU Malfunction: Description
The electric parking brake ECU performs the lock/release operation of the parking brake based on signals from the electric parking brake switch, or instruction signals from other systems via CAN communication.
| DTC Code |
Detection Condition |
Trouble Area |
| C13A0/11 |
Both of following conditions are met:
- Electric parking brake ECU is ON (engine switch is on (IG), or 15 sec. after engine switch is off and electric parking brake switch lock control is operating)
- Electric parking brake ECU's power source relay is open for approx. 0.5 sec.
|
Electric parking brake ECU |
| C13A5/41 |
All of following conditions are met:
- Electric parking brake ECU is ON (engine switch is on (IG), or 15 sec. after engine switch is off and electric parking brake switch lock control is operating)
- Electric parking brake ECU's internal current is abnormal
- When parking brake is operating, problem occurs for 0.3 sec.; when parking brake is not operating, problem occurs for 0.5 sec.
|
Electric parking brake ECU |
| C13B0 |
All of following conditions are met:
- Electric parking brake ECU is ON (engine switch is on (IG), or 15 sec. after engine switch is off and electric parking brake switch lock control is operating)
- Electric parking brake ECU's internal voltage is abnormal, or EEPROM is malfunctioning
- Problem occurs for approx. 0.5 sec.
|
Electric parking brake ECU |