DTC C164F: Brake Hydraulic Pressure Malfunction: Procedure

1. Clear the DTCs. Refer to DTC CHECK / CLEAR .
2. Check for DTCs. Refer to DTC CHECK / CLEAR .
   RESULT
   
   

   Result	Proceed to
   No DTCs are output	A
   DTC C164F is output	B

   HINT: 

   • The DTC is stored when a malfunction occurs in the electronically controlled brake system.
   • If troubleshooting and repair of the malfunction in the electronically controlled brake system has been completed, DTC C164F will not be output again when rechecking for DTCs.
   • If DTC C164F is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

B → See step   3 

A → See step   2