During Television Display Open, Close and Tilt Operation, Operation Sound is Loud or Abnormal Sound Occurs: Procedure

1. Check for foreign matter or obstructions caught in the moving parts of the panel.
   Fig 1: Identifying Television Display Panel

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No obstruction or foreign matter found.

NG → REMOVE ANY OBSTRUCTION OR FOREIGN MATTER FOUND 

OK: Go to next step 

1. Visually check if the television display has cracks or deformation.

   OK

   There are cracks and deformation.

NG → See step   3 

OK → END (CAUSE IS CRACKS AND DEFORMATION)