DTC B15E7: Harddisk Reading/Writing Malfunction(Low Temperature); DTC B15E8: Harddisk Reading/Writing Malfunction(High Temperature): Procedure
- CHECK CABIN
Move the vehicle to an area that is at room temperature and allow the cabin temperature to adjust to between -20°C (-4°F) and 65°C (149°F).
HINT:
- The hard disk drive may not operate normally at very high or low temperatures.
- Perform the DTC check at room temperature.
NEXT: Go to next step
- CHECK DTC
- Clear the DTC. Refer to DTC CHECK / CLEAR .
- Recheck for DTCs and check if the same DTC is output again.
OK
No DTCs are output.
NG → See step 3
OK → END
- REPLACE HARD DISK DRIVE. Refer to REMOVAL