LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> IS 250 Base, RWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter & Gauge System (Service Information) >> Satellite Switch >> Removal >> Removal

Satellite Switch: Removal: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination)  . Refer to REMOVAL - Step 52
  2. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination)  . Refer to REMOVAL - Step 54
  3. REMOVE FRONT DOOR OPENING TRIM COVER LH  . Refer to REMOVAL - Step 29
  4. REMOVE SIDE INSTRUMENT PANEL LH  . Refer to REMOVAL - Step 30
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 32
  6. REMOVE SATELLITE SWITCH SET 
    1. Remove the 3 screws and the finish panel No. 2 retainer with switch.
      Fig 1: Identifying Finish Panel Retainer With Switch And Screws
      GTY151098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws and remove the satellite switch set from the finish panel No. 2 retainer with switch.
      Fig 2: Removing Satellite Switch Set From Finish Panel Retainer With Switch
      GTY142501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals