LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> IS 250 Base, RWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter & Gauge System (Service Information) >> Satellite Switch >> Installation >> Installation

Satellite Switch: Installation: Installation

  1. INSTALL SATELLITE SWITCH SET 
    1. Engage the 2 claws and install the satellite switch set.
      Fig 1: Identifying Satellite Switch Set
      GTY129380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the finish panel No. 2 retainer with switch with the 3 screws.
      Fig 2: Identifying Finish Panel Retainer With Switch And Screws
      GTY151098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 25
  3. INSTALL SIDE INSTRUMENT PANEL LH  . Refer to INSTALLATION - Step 27
  4. INSTALL FRONT DOOR OPENING TRIM COVER LH  . Refer to INSTALLATION - Step 28
  5. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  . Refer to INSTALLATION - Step 88
  6. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  . Refer to INSTALLATION - Step 90
scientia non olet · About LEMON Manuals