LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> RX 350 AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Vehicle Stability Control System (Diagnostic Codes & Symptom Tests) >> Vehicle Stability Control System >> DTC C1430: Brake Pedal Load Sensing Switch OFF Stuck Malfunction; DTC C1431: Brake Pedal Load Sensing Switch ON Stuck Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the brake actuator assembly, perform zero point calibration and store system information. Refer to CALIBRATION .

HINT: 

When DTC C1425 and/or C1426 is output together with DTC C1430 and/or C1431, inspect and repair the trouble areas indicated by DTC C1425 and/or C1426 first. Refer to DTC C1425: Open in Stop Light Switch Circuit , or DTC C1426: Stop Light Switch OFF Stuck Malfunction ).

scientia non olet · About LEMON Manuals