LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> RX 350 AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) >> Fuel Lid Opener Switch >> Inspection >> Inspection

Fuel Lid Opener Switch: Inspection: Inspection

  1. INSPECT FUEL LID OPENER SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Fuel Lid Opener Switch
      GTY280444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      6 (B) - 7 (L) Fuel lid opener switch pushed Below 1 Ω
      6 (B) - 7 (L) Fuel lid opener switch not pushed 10 kΩ or higher
      TEXT IN ILLUSTRATION

      *1 Component without harness connected
      (Fuel Lid Opener Switch)

      If the result is not as specified, replace the fuel lid opener switch.

    2. Check that the switch illuminates.
      1. Apply battery voltage to the fuel lid opener switch and check that the switch illuminates.

        OK

        Measurement Condition Specified Condition
        Battery positive (+) → terminal 5
        Battery negative (-) → terminal 8        		 Illuminates

        If the result is not as specified, replace the bulb.

scientia non olet · About LEMON Manuals