Television Display does not Turn ON: Procedure

1. Check remote control system operation.
   1. Check whether only one of the television display assemblies does not turn on, or whether both television display assemblies do not turn on.

      Result

      Result	Proceed to
      One of the television display assemblies does not turn on.	A
      Both television display assemblies do not turn on.	B

B → See step   3 

A: Go to next step 

1. Clean the infrared ray receiving portion on the television display assembly.
   Fig 1: Identifying Infrared Ray Receiving Portion On Television Display Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check whether the same malfunction occurs.

   OK

   The function returns to normal.

NG → See step   5 

OK → END 

1. Check that the remote control operation of the rear system is not locked by the display and navigation module display.
   Fig 2: Identifying Rear System Locked Video Screen

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Check that "Rear System Lock" is Off on the "General Settings" screen.

      OK

      "Rear System Lock" is Off.

NG → RELEASE LOCK 

OK: Go to next step 

1. Check that the dry-cell battery of the remote control is not depleted.

   OK

   Battery is not depleted.

NG → REPLACE REMOTE CONTROL BATTERY 

OK: Go to next step 

1. Replace the remote control with a new or known good one.
2. Check that the television display assembly turns on.

   OK

   The television display assembly turns on.

NG → See step   6 

OK → END (REMOTE CONTROL WAS DEFECTIVE)