DTC B1661/44: Roll Over Cut Off Indicator Malfunction (08/2010 - 08/2011): Description

The curtain shield airbag cutoff switch is a mechanism that operates both the right and left sides of the curtain shield airbag and the front seat outer belt when the center airbag sensor detects a roll-over.

The RSCA OFF indicator is installed in the combination meter.

If the curtain shield airbag cutoff switch is operated, the indicator comes on to inform the drive that the roll-over detection system is not working.

The initial setting of the roll-over detection system is on. It automatically operates every time the engine switch is turned on (IG).

DTC Code	DTC Detection Condition	Trouble Area
B1661/44	When one of the following conditions is met: The center airbag sensor receives an open signal or short to ground in the RSCA OFF indicator circuit. An RSCA OFF indicator malfunction. A center airbag sensor malfunction.	Combination meter assembly Curtain shield airbag cutoff switch Center airbag sensor assembly Instrument panel wire Floor wire No. 2 floor wire