Installation (08/2011 - ): Installation

INSTALL LIGHT CONTROL RHEOSTAT
1. Attach the 2 claws to install the rheostat.
  
  Fig 1: Identifying Light Control Rheostat And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY See step 4
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH See step 5
INSTALL NO. 1 SWITCH HOLE BASE See step 6
INSTALL INSTRUMENT SIDE PANEL LH See step 7
ENABLE AUTOAWAY/RETURN FUNCTION
1. Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS .