Steering Pad Switch: Inspection: Inspection

INSPECT STEERING PAD SWITCH

Disconnect the steering pad switch connector.

Fig 1: Identifying Steering Pad Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the resistance according to the value(s) in the table below.

Standard resistance

Tester Connection	Condition	Specified Condition
DISP - EAU	DISP switch is not pushed in.	10 kΩ or higher
DISP - EAU	DISP switch is pushed in.	Below 1Ω

HINT:

If the value is not as specified, replace the steering pad switch.