LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250C Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Satellite Switch >> Removal >> Removal

Satellite Switch: Removal: Removal

  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH  . Refer to REMOVAL - Step 2
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  . Refer to REMOVAL - Step 3
  3. REMOVE INSTRUMENT SIDE PANEL LH  . Refer to REMOVAL - Step 30
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 32
  5. REMOVE SATELLITE SWITCH SET 
    1. Remove the 3 screws and finish panel No. 2 retainer with switch.
      Fig 1: Identifying Finish Panel Retainer With Switch And Screws
      GTY151098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws to remove the satellite switch set from the finish panel No. 2 retainer.
      Fig 2: Removing Satellite Switch Set From Finish Panel Retainer With Switch
      GTY151100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals