Steering Pad Switch: Installation: Installation

INSTALL STEERING PAD SWITCH ASSEMBLY
1. Engage the 4 pins.
  
  Fig 1: Identifying Screws & Steering Pad Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the steering pad switch assembly with the 2 screws.
3. Connect the 2 connectors and engage the clamp.
  
  Fig 2: Identifying Connectors & Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD . Refer to INSTALLATION - Step 1
INSTALL NO. 3 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 2
INSTALL NO. 2 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 3
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT STEERING PAD . Refer to INSTALLATION - Step 5
INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM