Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ANTENNA: INSTALLATION

1. INSTALL TIRE PRESSURE ANTENNA FRONT RH

(a) Install the front right tire pressure monitor antenna assembly with the nut.





Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(b) Connect the connector.

2. INSTALL FRONT FENDER LINER RH

3. INSTALL FRONT TIRE (RH)

Torque : 103 Nm (1,050 kgf-cm, 911 in-lbf)

4. INSTALL TIRE PRESSURE ANTENNA REAR LH

(a) Install the rear left tire pressure monitor antenna assembly with the 2 nuts.





Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(b) Connect the connector.





5. INSTALL REAR FENDER LINER LH

6. INSTALL REAR TIRE (LH)

Torque : 103 Nm (1,050 kgf-cm, 911 in-lbf)

7. INSTALL REAR SEATBACK ASSEMBLY

8. INSTALL REAR SEAT CUSHION ASSEMBLY

9. REGISTRATION OF TRANSMITTER ID

HINT
Registration

10. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure