DTC B2450: Initialization has not been Performed: Procedure

1. Perform initialization of the headlight swivel ECU. Refer to INITIALIZATION .

NEXT: Go to next step 

1. Check for DTCs. Refer to DTC CHECK / CLEAR .
   RESULT
   
   

   Result	Proceed to
   DTC B2450 is not output	A
   DTC B2450 is output	B

   HINT: 

   If the headlight swivel ECU stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight swivel ECU.

B → See step   3 

A → END