Installation

WIPER / WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Attach the claw to install the windshield wiper switch assembly.

(b) Connect the connector.

2. INSTALL UPPER STEERING COLUMN COVER

(a) w/o Driver Monitor Camera:

(1) Attach the 4 clips and claw to install the upper steering column upper cover to the instrument cluster finish panel.

(b) w/ Driver Monitor Camera:

(1) Connect the connector.

(2) Attach the 4 clips and claw to install the upper steering column upper cover to the instrument cluster finish panel.

3. INSTALL LOWER STEERING COLUMN COVER

(a) Attach the 2 claws to install the lower steering cover.

(b) Install the screw.

(c) Turn the steering wheel to the right and left as necessary to install the 2 screws.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.