Relay (for Window Defogger)

WINDOW / GLASS: RELAY (for Window Defogger): ON-VEHICLE INSPECTION

1. REMOVE DEFOGGER RELAY (DEFOG)

(a) Remove the defogger relay from the main body ECU (instrument panel junction block).

2. INSPECT DEFOGGER RELAY





(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the relay.

3. INSTALL DEFOGGER RELAY

(a) Install the defogger relay to the main body ECU (instrument panel junction block).