Installation

VF4BM TRANSFER / 4WD / AWD: TRANSFER CASE REAR OIL SEAL: REPLACEMENT

1. DRAIN TRANSFER OIL Service and Repair

2. REMOVE REAR PROPELLER SHAFT ASSEMBLY

(a) Remove the rear propeller shaft Removal.

3. REMOVE REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY Disassembly

4. REMOVE REAR TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL Disassembly

5. REMOVE TRANSFER CASE REAR OIL SEAL





(a) Using SST, tap out the oil seal.

SST : 09308-00010

NOTICE:
Be careful not to damage the oil seal and rear case contact surface.

6. INSTALL TRANSFER CASE REAR OIL SEAL





(a) Coat the lip of a new oil seal with MP grease.

(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the case upper surface.

SST : 09223-46011

SST : 09631-32020

7. INSTALL REAR TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL Reassembly

8. INSTALL REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY Reassembly

9. INSTALL PROPELLER SHAFT ASSEMBLY

(a) Install the rear propeller shaft Installation.

10. ADD TRANSFER OIL Testing and Inspection

11. CHECK FOR TRANSFER OIL LEAK