Removal

REAR SUSPENSION: REAR COIL SPRING (w/o Air Suspension): REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. REMOVE REAR STABILIZER LOWER BRACKET Removal

3. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH

(a) Support the rear axle housing.

(b) Remove the bolt on the lower side of the shock absorber.





(c) Disconnect the shock absorber from the axle housing.

4. DISCONNECT REAR FLEXIBLE HOSE Removal

5. REMOVE REAR COIL SPRING LH

(a) While lowering the axle housing, remove the coil spring.

NOTICE:
Be careful not to snap the brake line and parking brake cable.

6. REMOVE HOLLOW SPRING SUB-ASSEMBLY

(a) Remove the hollow spring from the frame.