Installation

SUSPENSION CONTROL: CONTROL VALVE ASSEMBLY: INSTALLATION

1. INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY

(a) Install the No. 2 height control valve with the 2 bolts.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

2. CONNECT HEIGHT CONTROL TUBE

(a) Connect the 3 height control tubes Suspension Control System (w/ Air Suspension).

HINT
For the connection procedure of the tubes (type 1 and type 2), refer to Precaution of the Suspension Control System section.

(b) Connect the connector.

3. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. CHECK CONNECTION OF TUBE FOR AIR LEAK

(a) Check the connections of the tubes for air leakage Suspension Control System (w/ Air Suspension).