Installation

STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: INSTALLATION

1. INSTALL TILT AND TELESCOPIC SWITCH

(a) Attach the claw to install the tilt and telescopic switch.

(b) Connect the connector.

2. INSTALL STEERING COLUMN LOWER COVER

(a) Install the 3 screws.

(b) Attach the 2 claws to install the steering column lower cover.

NOTICE:
Do not damage the tilt and telescopic switch.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Reset the auto tilt away function setting to the previous condition by changing the customize parameter Programming and Relearning.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.